- Nortel Communication Server IP Deskphone User Guide

Additional call features
112
Additional call features
Contact your system administrator to determine if the following call
features are available on your IP Phone.
• “Using AutoDial Transfer” on page 112
• “Using the Buzz signal” on page 113
• “Using Call Page Connect to make an announcement” on page 113
• “Using Centrex/Exchange Line Switchhook Flash” on page 114
• “Charging a call or charging a forced call” on page 115
• “Using Enhanced Override” on page 118
• “Using Forced Camp-on feature” on page 119
• “Overriding a busy signal” on page 120
• “Using Privacy Release” on page 120
• “Using Radio Page” on page 121
• “Using Voice Call” on page 123
Using AutoDial Transfer
Use the AutoDial Transfer feature to transmit digits through your AutoDial
key to the Central Office after a Trunk Switchhook Flash. You must be on
a Central Office/Exchange (CO) trunk call from or to a CO that offers
Centrex or exchange line-type features.
To use AutoDial Transfer when picking up an incoming trunk call:
1. Press the Centrex Switchhook Line
Flash key and wait for an interrupted dial
tone.
2. Press the AutoDial key to call the
number desired.
CentrexSHF
Autodial