- Nortel Communication Server IP Deskphone User Guide

Additional call features
103
Additional call features
Contact your system administrator to determine if the following call
features are available on your IP Phone.
• “Using AutoDial Transfer” on page 103
• “Using the Buzz feature” on page 104
• “Using Call Page Connect to make an announcement” on page 104
• “Using Centrex/Exchange Line Switchhook Flash” on page 105
• “Charging a call or charging a forced call” on page 105
• “Using Enhanced Override” on page 108
• “Using Forced Camp-on” on page 109
• “Overriding a busy signal” on page 110
• “Using Privacy Release” on page 111
• “Using Radio Page” on page 112
• “Using Voice Call” on page 114
Using AutoDial Transfer
Use the AutoDial Transfer feature to transmit digits through your AutoDial
key to the Central Office after a Trunk Switchhook Flash. You must be on
a Central Office/Exchange (CO) trunk call from or to a CO that offers
Centrex or exchange line-type features.
To use AutoDial Transfer when picking up an incoming trunk call:
1. Press the Centrex Switchhook Line
Flash key and wait for an interrupted dial
tone.
2. Press the AutoDial key to call the
number desired.
CentrexSHF
AutoDial