Server User Manual

SNMP MIB 83
SNMP MIB
SNMP is the protocol used to communicate TM 3.1 IP Trunk 3.01 (and later)
alarms or events. Support for the SNMP Management Information Bases
(MIB) on the IP trunk card is composed of two parts: the standard MIB-2
and extensions for the IP trunk card.
MIB-2 suppor t
Support of MIB-2 is enabled by the use of the WindRiver SNMP agent,
WindNet©. The WindNet© agent supports the following MIB-2 groups:
•
system
•
interfaces
•
AT
• IP
•
Internet Control Message Protocol (ICMP)
•
TCP
• UDP
•
SNMP
The WindNet agent supports both SNMP-V1 and V2c protocols.
IP Trunk 3.01 (and later) SNMP agent
The SNMP agent supports the Operation, Administration, and Maintenance
(OA&M) of IP Trunk 3.01 (and later), using TM 3.1. It can configure the IP
trunk card through file transfer services. The agent supports the SNMP-V1
protocol.
The SNMP agent provides the following capabilities:
•
Retrieval of system wide variables, such as:
— card state
— number of DSPs on the card
— number of available voice channels
— IP addresses
— software version
— number of IP Trunk 3.01 (and later) nodes in fallback (that is, PSTN
operation)
•
Control of D-channel state, such as:
— enable
— disable
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Copyright © 2007, Nortel Networks
.