Server User Manual

NTCW84EA DCH PC Card pigtail cable 441

Table 74

NTAG81BA Maintenance Extender cable connections

9-pin D-Sub (Male) 9-pin D-Sub (Female)

NTCW84EA DCH PC Card pigtail cable

The NTCW84EA pigtail cable connects port 0 of the DCH PC Card to

the J14 pin header on the motherboard. The cable routes the D-Channel

signals to the backplane and the I/O panel. The PC Card connector is keyed

to allow insertion only in the correct direction. The pin header connector is

not keyed. Be careful to align the connector with the pin header. See Figure

152 "NTCW84EA pigtail cable" (page 442) and Table 75 "NTCW84EA pigtail

cable connections" (page 442).

Nortel Communication Server 1000

IP Trunk Fundamentals

NN43001-563 02.01 Standard

Release 5.5 21 December 2007