Server User Manual

ITG-Pentium 24-port trunk card faceplate maintenance display codes 425
Code
Description
LDR Card is running active leader tasks.
BLDR Card has detected existing Active Leader and is running Backup
Leader tasks, or the card is configured as a Leader and is
missing its node properties. Transmit node properties from TM
3.1.
FLR Card has detected the Active Leader and is running Follower
tasks.
In addition, if the IXP encounters any failures during its initialization, an
H:XX error code displays. The list of error codes is listed in Table 69 "List
of error codes" (page 425).
Table 69
List of error codes
Code
Description
H:00 Host Processor not booting
H:01 SDRAM test failure
H:02 SRAM test failure
H:04 PC Card device failure
H:08 Network interface failure
H:10 System interface failure
H:20 DSP interface failure
H:40 NVRAM/EEPROM interface failure
H:80 PCM connector failure
ITG-Pentium 24-port trunk card faceplate maintenance display codes
The maintenance display of the ITG-Pentium 24-port trunk card provides
startup codes, operating mode and error information on the functional card
state. Table 70 "ITG-Pentium 24-port trunk card faceplate maintenance
display message summary" (page 426) lists the startup codes and operating
mode codes.
When the ITG-Pentium 24-port trunk card starts up, it performs multiple
self-tests. The faceplate display shows the test results.
If self-tests T:00-T:09 fail, the self-test program stops and the faceplate
displays an "F:xx" message to indicate which test failed. For example, if the
timer test T:05 fails, "F:05" is displayed. If more than one test fails, the
message displayed indicates the first failure.
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Copyright © 2007, Nortel Networks
.