Server User Manual
System level maintenance 397
Table 56
Supported LD 32 commands
Command
Function
DISC l s c
Disable the indicated IP trunk card, where:
l = loop, s = shelf, and c = card.
DISI l s c
Disable the indicated IP trunk card when idle, where:
l = loop, s = shelf, and c = card.
DISU l s c u
Disable the indicated unit, where:
l = loop, s = shelf, c = card, and u = unit.
ENLC l s c
Enable the indicated IP trunk card, where:
l = loop, s = shelf, and c = card.
ENLU l s c u
Enable the indicated unit, where:
l = loop, s = shelf, c = card, and u = unit.
IDC l s c
Print the Card ID information for the specific IP trunk
card, where:
l = loop, s = shelf, and c = card.
STAT l s c
Print the system software status of the indicated IP
trunk card, where:
l = loop, s = shelf, and c = card.
STAT l s c u
Print the system software status of the indicated unit,
where:
l = loop, s = shelf, c = card, and u = unit.
For Meridian 1 PBX 11C Cabinet, Meridian 1 PBX 11C Chassis, CS 1000M Cabinet, and CS 1000M
Chassis, the TN address < l s c > should be replaced by < s c > and the < l s c u > address
replaced by < s c u >.
Table 57
Supported LD 36 commands
Command
Function
DISC l s c
Disable the indicated IP trunk card, where:
l = loop, s = shelf, and c = card.
DISU l s c u
Disable the indicated unit, where:
l = loop, s = shelf, c = card, and u = unit.
ENLC l s c
Enable the indicated IP trunk card, where:
l = loop, s = shelf, and c = card.
ENLU l s c u
Enable the indicated unit, where:
l = loop, s = shelf, c = card, and u = unit.
For Meridian 1 PBX 11C Cabinet, Meridian 1 PBX 11C Chassis, CS 1000M Cabinet, and CS 1000M
Chassis, the TN address < l s c > should be replaced by < s c > and the < l s c u > address
replaced by < s c u >.
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Copyright © 2007, Nortel Networks
.










