Server User Manual

386 OA and M using the ITG shell CLI and overlays
Command
Function
ENLC l s c
Enable the described IP trunk card, where:
l = loop, s = shelf, c = card
ENLU l s c u
Enable the described unit, where:
l = loop, s = shelf, c = card, u = unit
IDC l s c
Print the Card ID information for the described
IP trunk card, where:
l = loop, s = shelf, c = card
STAT l s c
Print the system software status of the indicated
IP trunk card where:
l = loop, s = shelf, c = card
STAT l s c u
Print the system software status of the indicated
unit, where:
l = loop, s = shelf, c = card, u = unit
Disable the indicated IP trunk card
To disable the indicated IP trunk card in LD 32, use the following command:
DISC l s c
Disable the indicated IP trunk card,
where:
l = loop, s = shelf, c = card
Disable the indicated IP trunk card when idle
To disable the indicated IP trunk card when idle in LD 32, use the following
command:
DISI l s c
Disable the indicated IP trunk card
when idle, where:
l = loop, s = shelf, c = card
Enable an indicated IP trunk card
To enable an indicated IP trunk card in LD 32, use the following command:
ENLC l s c
Enable the indicated IP trunk card,
where:
l = loop, s = shelf, c = card
Disable an indicated IP trunk card port
To disable an indicated IP trunk card port in LD 32, use the following
command:
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Copyright © 2007, Nortel Networks
.