Server User Manual

376 OA and M using the ITG shell CLI and overlays
Card Mode: Normal
Codecs: G.711 mu-law (default), G.711 a-law, G.729AB,
G.729A
EC Tail Length: Value from TM 3.1-32
DCHIP IP: 47.11.217.21
DCH Num: 10
DCH ON Card: YES (version 3.1)
DCH Status: ENBL
Protocol: SL1 ESN5
initBchNum: 1
esn5Prefix: |100|
TLAN set to Auto-negotiate Speed and Duplex Settings
TLAN currrently operate at: 100 Mbps (Carrier OK)
ELAN set to 10BaseT Operation
ELAN set to Half Duplex Operation
value = 38 = 0x26 = ’&’
The following commands give additional information about an IP trunk card:
•
ldrResTableShow
•
ifShow
•
dongleIDShow
•
serialNumShow
•
firmwareVersionShow
•
swVersionShow
•
emodelSim
Display IP Trunk 3.01 (and later) Gatekeeper status
At the ITG shell prompt, type the following command to display information
about the IP Trunk 3.01 (and later) registration with a Gatekeeper:
gkShow
The following information appears on the TTY:
•
provisioned information (for example, the H.323 node name, which card
to register, and the Gatekeeper IP address)
• operational information, such as whether the IP trunk card is registered
with the Gatekeeper and with which Gatekeeper the IP trunk card is
registered (Primary or Alternate)
•
when the next re-registration attempt will occur
•
values from the Gatekeeper, such as Time To Live (TTL) and endpoint ID
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Copyright © 2007, Nortel Networks
.