Server User Manual

System commands LD 32 363
Table 52
LD 32 IP Trunk 3.01 (and later) maintenance commands
Command
Description
DISC l s c
Disable the indicated card, where: l =
loop, s = shelf, c = card
DISI l s c
Disable the indicated card when idle,
where: l = loop, s = shelf, c = card
Use the DISI command to disable
the IP trunk card instead of the DISC
command. The disablement of the IP
trunk card is indicated by the NPR011
message.
DISU l s c u
Disable the indicated unit,
where: l = loop, s = shelf,
c = card, u = unit
ENLC l s c where: l = loop, s = shelf,
c = card
ENLU l s c u
Enable the described unit,
where: l = loop, s = shelf,
c = card, u = unit
IDC l s c
Print the Card ID information for the
described card,
where: l = loop, s = shelf,
c = card
STAT l s c
Print the system software status of the
indicated card.
where: l = loop, s = shelf, c = card
STAT l s c u
Print the system software status of the
indicated unit,
where: l = loop, s = shelf, c = card, u
= unit
Disable the indicated IP trunk card
To disable the indicated IP trunk card in LD 32, use the following command:
DISC l s c
Disable the indicated IP trunk card,
where: l = loop, s = shelf,
c = card
Disable the indicated IP trunk card when idle
To disable the indicated IP trunk card when idle in LD 32, use the following
command:
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Copyright © 2007, Nortel Networks
.