Server User Manual

336 Provisioning IP Trunk 3.01 (and later) in TM 3.1

•

In the ITG – ISDN IP Trunk window, as seen in Figure 92

"ITG ISDN IP Trunk window" (page 302), from the menu

select Conﬁguration > Node > Gatekeeper. The ITG Node

Gatekeeper properties window opens. See Figure 131 "ITG

Node Gatekeeper Properties window" (page 336).

Figure 131

ITG Node Gatekeeper Properties window

• Alternatively, from the ITG Dialing PLan window, click

Conﬁguration > Gatekeeper.

No matter which method was used, the ITG Node Gatekeeper

Properties window opens.

Select the correct Gatekeeper option from the Gatekeeper Option

drop-down list. The options are as follows:

•

Use Gatekeeper Zone from TM 3.1 Navigator (see Procedure 50

"Using a Gatekeeper zone from TM 3.1 Navigator" (page 337)).

•

Use Independent Gatekeeper (see Procedure 51 "Using the

Independent Gatekeeper option" (page 338)).

•

No Gatekeeper. Select this option to remove the provisioning

that tells the IP trunk card to use a Gatekeeper.

—End—

Nortel Communication Server 1000

IP Trunk Fundamentals

NN43001-563 02.01 Standard

Release 5.5 21 December 2007