Server User Manual

Define the dialing plan information 331
10
Enter the node IP address, select the node capability from the
drop-down list, enter a name for the node (optional), set the QoS
monitoring option, and enter comments if desired.
WARNING
If a remote node has IP Peer H.323 Gateway capability, do
not use QoS monitoring unless that node is also running IP
Trunk 3.01 (and later). No other IP Peer H.323 Gateways
support IP Trunk 3.01 (and later)-formatted QoS.
Unless both sides support IP Trunk 3.01 (and later) and
have it enabled, calls cannot be made to that node.
11
Click Apply. See Figure 126 "Remote Node Properties General
tab" (page 331).
Figure 126
Remote Node Properties General tab
12
Click the Digits dialed tab. The Add button is inactive until values
are entered in the Dial plan digits field.
On the Digits dialed tab, enter the dial plan information for this node.
13
From the Dial Plan drop-down list, select the correct dial plan/type of
number selection. See Figure 127 "Select the Dial Plan" (page 332).
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Copyright © 2007, Nortel Networks
.