Server User Manual

Deﬁne the dialing plan information 323

Figure 115

ITG Dialing Plan window

To add a new remote node, click Conﬁguration > Add Remote

Node. A remote node is an entry in the dialing plan table that

represents a device to be reached by provisioning on the IP trunk

card. See Figure 115 "ITG Dialing Plan window" (page 323).

In IP Trunk 3.01 (and later), an address that does not exist in this

provisioning is routed to the Gatekeeper, which, at a minimum,

resolves the destination.

This enables interworking of legacy ITG Trunk applications with

H.323 gateways.

The ITG Dialing Plan – Remote Node Properties window opens.

See Figure 116 "ITG Dialing Plan, Remote Node Properties window,

General tab" (page 324) and Figure 117 "ITG Dialing Plan, Remote

Node Properties window, General tab with drop-down list open"

(page 324).

Nortel Communication Server 1000

IP Trunk Fundamentals

NN43001-563 02.01 Standard

Release 5.5 21 December 2007