Server User Manual

Conﬁgure TM 3.1 Alarm Management to receive SNMP traps from the IP trunk cards 279

Figure 66

Devices.txt ﬁle:

For each IP trunk card in each monitored IP Trunk 3.01 (and later)

node, add a line consisting of three ﬁelds separated by spaces. See

Table 50 "Format of Devices.txt ﬁle" (page 279). Enter the ﬁrst line

beginning underneath the last line that begins with a "#". Lines

beginning with "#" are comments and not processed. Do not begin

any of the lines deﬁning IP Trunk 3.01 (and later) devices with "#".

Table 50

Format of Devices.txt ﬁle

Device Type IP Address Device Name

ITG

xxx.xxx.xxx.xxx

Site_Leader_0

Site_Leader_1

Site_Follower_2

The Device Name cannot contain any spaces. Use a descriptive name

for the system site where the IP Trunk 3.01 (and later) node is located.

Click File > Save.

8 In the Alarm Notiﬁcation Run Options window, click OK.

Nortel Communication Server 1000

IP Trunk Fundamentals

NN43001-563 02.01 Standard

Release 5.5 21 December 2007