Server User Manual

Control node access with SNMP community name strings 251

Figure 57

Accounting Server tab

Click the Enable Radius accounting records checkbox.

Enter the Radius accounting server IP address. Add the

same Accounting Server IP address that was conﬁgured in the

Card Routing Table entries as discussed in "Conﬁgure SNMP

Traps/Routing and IP addresses tab" (page 247).

Change the default port number from the default (1813), if required.

Enter the key. The key is a signature for authentication of the Radius

records. It can be a maximum of 64 alpha-numeric characters.

Click Apply.

—End—

Control node access with SNMP community name strings

Change the SNMP community name str ings to control access to the IP

Trunk 3.01 (and later) node. TM 3.1 uses the community name strings to

refresh the IP Trunk 3.01 (and later) node and card status and to control the

transmitting and retrieving of ﬁles for database synchronization.

To retrieve the community names if forgotten, connect a TTY to the IP trunk

card maintenance port. Restart the IP trunk card. The IP trunk card displays

the community name on the TTY during startup.

Nortel Communication Server 1000

IP Trunk Fundamentals

NN43001-563 02.01 Standard

Release 5.5 21 December 2007