Server User Manual

238 Install and conﬁgure IP Trunk 3.01 (and later) node

Figure 51

General tab

Conﬁgure node location properties

Deﬁne the Node Location properties: select the TM 3.1 site, TM 3.1

system, Customer, and Node number from the drop-down lists.

The site name, system name, and Customer must exist in the TM 3.1

Navigator before a new IP Trunk 3.01 (and later) node can be added.

—End—

Single vs. separate TLAN and ELAN subnets

ATTENTION

IMPORTANT!

Nortel recommends that separate TLAN and ELAN subnets be used for the

IP Trunk 3.01 (and later) voice and management networks (TLAN and ELAN

subnets).

Separate subnets implies the following:

•

separate TLAN and ELAN network interface groups into respective

Virtual LANS (VLANs) or connect them to separate Layer 2 switches

• two default gateway routers (can be the same physical Layer 3 router)

Nortel Communication Server 1000

IP Trunk Fundamentals

NN43001-563 02.01 Standard

Release 5.5 21 December 2007