Server User Manual

Conﬁgure IP Trunk 3.01 (and later) data in TM 3.1 237

Add an IP Trunk 3.01 (and later) node and conﬁgure general node

properties

Follow the steps in Procedure 17 "Adding a node and conﬁguring general

node properties" (page 237) to add an IP Trunk 3.01 (and later) node and

conﬁgure general node properties.

Procedure 17

Adding a node and conﬁguring general node properties

Step Action

Launch TM 3.1 (and later) on the TM 3.1 PC.

From the TM 3.1 Navigator window, double-click the Services folder

and double-click the ITG ISDN IP Trunks icon. The IP Telephony

Gateway- ISDN IP Trunk window opens.

Select Conﬁguration > Node > Add in the IP Telephony Gateway

– ISDN IP Trunk window. The Add ITG Node window opens. See

Figure 50 "Add ITG Node window" (page 237).

Figure 50

Add ITG Node window

In the Add ITG Node window, keep the default selections Meridian

1 and Deﬁne the node conﬁguration manually. Click OK. The

New ITG Node – General window appears. See Figure 51 "General

tab" (page 238).

Nortel Communication Server 1000

IP Trunk Fundamentals

NN43001-563 02.01 Standard

Release 5.5 21 December 2007