Server User Manual

Configure dialing plans within the corporate network 235
Prompt Response Description
TYPE DSC
TSC
Distant Steering Code.
Trunk Steering Code.
...
RLB
xx
Route List Entry created in LD 86.
LD 90 Configure dialing plan
Prompt Response Description
REQ NEW Add new data.
CUST
xx
Customer number as defined in LD 15.
FEAT
NET
Feature.
Network translation tables.
TRAN AC1
AC2
Translator.
Access Code 1 (NARS/BARS).
Access Code 2 (NARS).
TSC
NPA
NXX
LOC
SPN
Type of data block.
Numbering Plan Area Code.
Central Office Translation.
ESN Location Code Translation.
Special Code Translation.
...
RLI
xxx
Route List Index created in LD 86.
Disable the Media Card 32-port and ITG-Pentium 24-port trunk cards
In order to transmit the card properties from TM 3.1 (and later) to the Media
Card 32-port and ITG-Pentium 24-port trunk cards, the IP Trunk 3.01 (and
later) trunks must be in the disabled state.
To disable a Media Card 32-port and ITG-Pentium 24-port trunk card, use
the following command in LD 32 or in TM 3.1 Maintenance Windows:
DISI l s c u
Wait for the system message NPR0011 to be displayed.
Requested pack is no longer busy and has been disabled.
Indication that the DISI L S C command has been completed.
This indicates that the DISI command has been completed.
The status of the Media Card 32-port and ITG-Pentium 24-port trunk card in
TM 3.1 is updated to disabled.
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Copyright © 2007, Nortel Networks
.