Server User Manual

Install filter and NTND26 cable (for MSDL and DCHIP cards in same Large System equipment
row) 201
•
NTND26AB – 18 ft
•
NTND26AC – 35 ft
•
NTND26AD – 50 ft
4
Connect the appropriate NTND26 cable assembly to the D-Channel
port connector on the faceplate of the MSDL card and to the inward
side of the 15-pin filter connector installed in the I/O panel of the
IPE Module that contains the DCHIP card (see Figure 39 "NTND26
cable routing diagram" (page 202)).
Figure 38
15-pin filter connector installation
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 02.01 Standard
Release 5.5 21 December 2007
Copyright © 2007, Nortel Networks
.