Server User Manual

198 Install and conﬁgure IP Trunk 3.01 (and later) node

order to tie the shield of the LAN cable to the frame ground for EMC

compliance.

Figure 37

NTMF94EA ELAN, TLAN and serial port cable

—End—

Install shielded TLAN network interface cable

Use Shielded CAT5 cable to connect to the ELAN and TLAN network

interfaces on the NTCW84KA cable. To conduct a ground loop test, refer to

"Prevent ground loops on connection to external customer LAN equipment"

(page 446) and follow the test procedure.

For DCHIP cards

Connect a shielded CAT5 LAN cable from the TLAN subnet hub to the

RJ-45 coupler on the NTCW84KA TLAN network interface.

For non-DCHIP cards

Connect a shielded CAT5 LAN cable from the TLAN subnet hub to the

RJ-45 coupler on the NTMF94EA TLAN network interface.

Nortel Communication Server 1000

IP Trunk Fundamentals

NN43001-563 02.01 Standard

Release 5.5 21 December 2007