Server User Manual

Contents 13

Appendix D Subnet mask conversion from CIDR to dotted

decimal format 457

Appendix E CLI commands 459

Appendix F Conﬁgure a Netg ear RM356 modem router for

remote access 461

Contents 461

Introduction 461

Security features of the RM356 modem router 462

Install the RM356 modem router 462

Conﬁgure the TM 3.1 PC to communicate with a remote system site through a

modem router 463

Conﬁgure the RM356 modem router through the manager menu 463

RM356 modem router manager menu (application notes on the ELAN subnet

installation) 467

Appendix G Upgrade an ITG Trunk 1.0 node to suppor t ISDN

signaling trunks 473

Contents 473

Upgrade procedure summary 474

Before you begin 474

Install the DCHIP hardware upgrade kit 476

Install the DCHIP I/O Panel breakout cable from the upgrade kit 477

Upgrade the ITG 8-port trunk card ITG basic trunk software to ITG/ISL trunk

software 478

Step 1 - Remove ITG Trunk 1.0 conﬁguration ﬁles 478

Step 2 - Transmit ITG Trunk 2.0 software to the ITG 8-port trunk cards 480

Remove ITG Trunk 1.0 conﬁguration data from Meridian 1 482

Conﬁgure the Meridian 1 ITG/ISL trunk data 483

Upgrade considerations 483

Verify ROM-BIOS version 485

Upgrade Troubleshooting 485

TM 3.1 cannot refresh view (card not responding) 485

How to upgrade software using the ITG shell 485

Nortel Communication Server 1000

IP Trunk Fundamentals

NN43001-563 02.01 Standard

Release 5.5 21 December 2007