Network Card User's Manual

Installation procedures 65

Connecting the ISDN BRI terminals (for line applications)

For line applications, ﬁve procedures are required to connect ISDN BRI

terminals to the system:

Step Action

Connect system cables to the cross-connect terminal. See

Procedure 20 "Connecting system cables to the cross-connect

terminal" (page 66).

Cross-connect the DSLs at the cross-connect terminal. See

Procedure 21 "Cross-connecting the DSLs at the cross-connect

terminal" (page 70).

Connect the terminating resistor to the SILC DSL. See Procedure 22

"Connecting the terminating resistor to the SILC DSL" (page 74).

Connect the ISDN BRI terminals to the DSL. See Procedure 23

"Connecting the ISDN BRI terminals to the DSL" (page 76).

Initialize the terminals. See Procedure 24 "Initializing a Nortel

Networks M5317TDX terminal" (page 80).

—End—

Figure 19 "Connecting ISDN BRI terminals to the system" (page 66) shows

a typical DSL and multiple ISDN BRI terminals connected to the system.

Nortel Communication Server 1000

ISDN Basic Rate Interface Installation and Commissioning

NN43001-318 01.02 Standard

Release 5.0 20 June 2007