Computer Accessories User's Manual

Install the Linux base software on the IBM x306m and HP DL320 G4 servers 41

DL320 G4 server. Figure 123 "IBM x306m rear view" (page

133) shows the ELAN and TLAN network interfaces for the

IBM x306m server. For a definition of ELAN and TLAN see

“Network configuration” (page 143).

Note 2: You can accept the default gateway values or choose

a value that is more appropriate to your needs. The choice of

ELAN or TLAN as the default gateway NIC can be influenced

by the applications that you are going to deploy on the server

and by your network topology. For a definition of ELAN

and TLAN see “Network configuration” (page 143).It is not

necessary to make changes to the default gateway during the

installation. After the installation, the default gateway NIC can

be changed by using the CLI commands

baseparamsconfig

or networkconfig. Routing entries can be added or deleted

by using the CLI command routeconfig. For a list of Nortel

Linux base CLI commands see Table 11 "Nortel Linux base

CLI commands" (page 141).

Press Enter to continue. The Configuration Validation 1

screen appears as shown in Figure 23 "Configuration validation

1 window" (page 44).

10 In the System Console Redirection screen appears as shown

in Figure 20 "System Console Redirection window" (page 41).

Select the redirection option and press Enter to continue.

Note: This screen appears only if you chose to install using

an attached keyboard, video monitor, and mouse.

Figure 20

System Console Redirection window

11 In the Time zone selection screen type the appropriate region

number at the prompt and then press Enter to continue.

Nortel Communication Server 1000

Linux Platform Base and Applications Installation and Commissioning

NN43001-315 02.09

29 October 2008