Computer Accessories User's Manual

130 COTS Servers

A BIOS Serial Console Baud Rate configuration window

appears. This window presents you with four settings for the

serial port speed:

• 9600

• 19200

•

57600

•

115200

5 Navigate to the 9600 setting and press Enter.

This configures the serial port speed to 9600 b/ps.

The BIOS Serial Console & EMS configuration menu screen

reappears.

6 Press ESC to exit the BIOS Serial Console & EMS configuration

menu screen.

The RBSU menu screen reappears.

7 Press ESC to exit the ROM-based Setup Utility.

--End--

Setting the HP DL320 G4 server BIOS password

Step Action

1 Press Power to boot the server.

The server boots and the HP DL320 G4 boot screen appears.

Figure 119

HP DL320 G4 server boot screen

Note: If the server is already up and running, power the

server off and on to reboot and receive the HP DL320 G4

boot screen.

2 Press F9 to invoke the ROM-based setup utility (RBSU) menu

screen.

The RBSU menu screen appears.

Nortel Communication Server 1000

Linux Platform Base and Applications Installation and Commissioning

NN43001-315 02.09

29 October 2008