User's Manual

Configuring the dialing plan for PSTN access to SRG users in Normal Mode 53
Prompt Response Description
CUST xx
Customer number as defined in LD 15.
FEAT DGT
Digit manipulation data block
DMI 1-999
Digit Manipulation Index numbers
The maximum number of Digit Manipulation tables is defined at
the MXDM prompt in LD 86.
DEL (0)-19
Number of leading digits to be deleted, usually 0 at the main
office.
INST x…x
Insert. Up to 31 leading digits can be inserted, usually none at
the main office. Default is none.
ISPN
IP Special Number
(YES) For off-net calls
NO For on-net calls
CTYP
Call type to be used by the call. This call type must be
recognized by the NRS and far-end switch. This is critical for
correct CLID behavior.
If ISPN=NO, the CLID is based on this field. If ISPN=YES, the
CLID is based on the call type before digit manipulation.
SPN For off-net calls (ISPN=YES)
LOC For on-net calls (ISPN=NO)
b. Configure the RLI in LD 86 with the RLB feature.
LD 86 Configure Route List Index.
Prompt Response Description
REQ NEW
Add new data.
CUST xx
Customer number as defined in LD 15.
FEAT RLB
Route List data block
RLI
Route List Index to be accessed
0-127 CDP and BARS
0-255 NARS
0-999 FNP
ENTR
0-63
Entry number for NARS/BARS Route List
X
Precede with x to remove
LTER NO
Local Termination entry
ROUT
Route number of the Virtual Trunk as provisioned in LD 16.
Nortel Communication Server 1000
Main Office Configuration Guide for SRG 50
NN43001-307 02.02 Standard
Release 5.0 3 December 2007
Copyright © 2005-2007, Nortel Networks
.