Telephone User's Manual

464 CIS ANI Digits Manipulation and Gateways Enhancements
Prompt Response Description
TN Terminal number
l s c u Format for Large System and CS 1000E system, where l = loop,
s = shelf, c = card, u = unit.
cu
Format for Small System and Media Gateway 1000B where c =
card and u = unit.
CUST
xx
Customer number, as defined in LD 15
... ... ...
KEY xx AAA yyyy...
ccc
xx = key number.
AAA = Key Function.
yyyy = DN or other data related to key function.
ccc = CLID entry.
- MARP (NO) YES Deny/Allow Multi Appearance Redirection Prime.
- CPND
aaaa
Calling Party Name Display.
- VMB
aaaa
Voice Mailbox.
- ANIE (0)-N ANI Entry:
It is of (0)-N where N=S_SIZE in customer data block.
If ANIE=0, no entry is associated with the DN key. The old
mechanism is used for building the ANI message.
If ANIE is of 1-N:.
•
If ANIC=YES for the outgoing CIS route where the call
takes place, then the components of the ANI message are
retrieved from the ANI entry in Customer Data Block, if
configured.
•
If the given ANI Entry is not configured, or if ANIC=NO for
the outgoing CIS route where the call takes place, then the
old mechanism is used for building the ANI message.
LD 11 - Configure the CAC for CIS and MFC signaling for digital sets.
Prompt Response Description
REQ: NEW
CHG
Add new data.
Change existing data.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.