Telephone User's Manual

Feature implementation 463
Prompt Response Description
- ANIE (0)-N ANI Entry: it is of (0)-N where N=S_SIZE in customer data block.
If ANIE=0, no entry is associated with the set. The old
mechanism is used for building the ANI message.
If ANIE is of 1-N:
•
If ANIC = YES for the outgoing CIS route where the call
takes place, then the components of the ANI message are
retrieved from the ANI entry in Customer Data Block, if
configured.
•
If the given ANI Entry is not configured, or if ANIC = NO for
the outgoing CIS route where the call takes place, then the
old mechanism is used for building the ANI message.
... ... ...
LD 10 - Configure the CAC for CIS and MFC signaling for analog 500/2500 sets.
Prompt Response Description
REQ: NEW
CHG
Add new data.
Change existing data.
TYPE:
500
Type of data block for analog (500/2500) set.
TN Terminal number
l s c u Format for Large System and CS 1000E system, where l = loop,
s = shelf, c = card, u = unit.
cu
Format for Small System and Media Gateway 1000B where c =
card and u = unit.
CUST
xx
Customer number, as defined in LD 15
... ...
SFLT
a..a
Secretarial Filtering.
CAC_CIS 0-(3)-9 CIS ANI Category Code.
CAC_MFC (0)-10 MFC CNI Category Code.
LD 11 - Configure ANI entry for Meridian 1 proprietary sets.
Prompt Response Description
REQ: NEW
CHG
Add new data.
Change existing data.
TYPE:
a...a
Telephone type. Type ? for a list of possible responses.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.