Telephone User's Manual

396 Charge Account and Calling Party Number
Attendant Consoles
To charge a call to an account before dialing, follow these steps:
Step Action
1
Press the loop key.
2 Press Charge.
3
Dial the Charge Account number.
4
When you have a dial tone, dial the telephone number.
—End—
To charge during a call in progress, follow these steps:
Step Action
1
While the source call is active on a loop key, press Charge.
2
Dial the Charge Account number.
The voice connection remains active.
3
Flash the switchhook or link to return to the call in progress.
—End—
To record a caller’s number for accounting purposes, follow these steps:
Step Action
1
While the source call is active on a loop key, press Calling No.
The other party is on hold.
2
Dial a Charge Account number or the caller’s number.
3 Press Calling No. again to return to the call.
—End—
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.