Telephone User's Manual

Feature operation 185

Feature operation

Network Wide Set-based Remote Call Forward

From the remote set dial:

Step Action

FCC RCFA code.

SCPW for the set to be forwarded.

The complete DN of the set to be forwarded. This DN is the full

DN required to call the set to be forwarded from the user’s present

location.

Expected Result: Conﬁrmation tone is delivered to the user.

From the remote set continue dialing:

The CFW DN to be activated followed by the end of dial indicator (#).

Expected Result: Conﬁrmation tone is delivered to the user.

Error Condition: If an error should occur during set-based RCFW,

the user is presented with an Overﬂow tone. To remove the error

condition, the user must release from the operation and begin again.

—End—

Attendant-based Remote Call Forward

From the attendant console, perform the following:

Procedure 1

Attendant-based Remote Call Forward

Step Action

Press an idle loop key followed by the RFW key.

Expected Result: The RFW key is ﬂashing and the Loop key is

steady lit.

Dial the DN of the set to be forwarded.

Expected Result: If a password is required, the RFW key is winking,

and the console display shows "PWD –". If the console does not

support alpha characters, the display is blank.

Nortel Communication Server 1000

Features and Services Fundamentals — Book 2 of 6 (C)

NN43001-106 02.04 Standard

Release 5.5 9 May 2008