Telephone User's Manual

126 Call Forward by Call Type
Prompt Response Description
- FNAL (HNT)
ATT
NO
FDN
Treatment for incoming internal calls.
- CFNA 1-(4)-15 Number of ringing cycles for CFNA.
LD 16 - Define a trunk route as internal or external for Call Forward by Call Type.
Prompt Response Description
REQ CHG Change existing data.
TYPE CDB Customer Data Block.
CUST
xx
Customer number, as defined in LD 15
ROUT Route number
0-511
Range for Large System and CS 1000E system.
0-127
Range for Small System and Media Gateway 1000B
RCLS (EXT) INT Route class marked as (external) or internal.
LD 10 - Enable Call Forward by Call Type for analog (500/2500 type) telephones.
Prompt Response Description
REQ: CHG Change existing data.
TYPE:
500
Telephone type.
TN Terminal number
l s c u Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit.
cu
Format for Small System and Media Gateway 1000B where c =
card and u = unit.
HUNT
xxxx
Hunt DN for internal calls.
CLS (CFTD) CFTA (Deny) allow Call Forward by Call Type Telephone. Must have
Hunting (HTA) and Call Forward No Answer (FNA) allowed.
FTR EFD xxxx
EHT xxxx
FDN xxxx
Flexible Call Forward No Answer DN for external calls. Hunt DN
for external calls.
Flexible Call Forward No Answer DN for internal calls.
LD 11 - Enable Call Forward by Call Type for Meridian 1 proprietary telephones.
Prompt Response Description
REQ: CHG Change existing data.
TYPE:
a...a
Telephone type. Type ? for a list of possible responses.
TN Terminal number
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.