- Nortel IP Phone Nokia Connection User Guide

MCC 3100 for Nokia configuration
Nortel Mobile Communication Client 3100 for Nokia User Guide 35
3. Complete the fields on the pane using the information in the following
table as a guide.
Table 7: Call Settings pane fields
Field Settings
On Incoming Calls Select a call handling mode:
• Show Client Alert (Default): Incoming
calls over the cellular network trigger an
alert. You must acknowledge the screen
pop-up to accept or decline the call. The
incoming cellular call is autoanswered on
your behalf.
• Show Nokia Alert: Incoming calls
immediately forward to your cell phone,
and a message displays that the call has
been accepted and you must answer the
incoming call.
Nortel recommends that you configure Show
Client Alert in the following conditions:
• you use a password to lock your screen.
• you use a Bluetooth headset to accept
your incoming calls.
Preferred Call Setup Select how calls are placed from the device.
Direct (Default): Calls are placed directly to
the other party through the enterprise
network.
Call Me First: Calls are placed by having the
enterprise network call you first, then
connecting to the second party.
Call From Call From allows you to start calls from
devices other than your mobile device.
By default, the Call From setting is your
mobile device.