User's Manual

Configuration 73
Copyright © 2003, Nortel Networks MCP SIP Application Module Basics
Nortel Networks Confidential
Figure 26 Completing the SIP TCF Base tab fields
Table 19 SIP TCF Base tab field descriptions (Sheet 1 of 2)
Field Value Description
Transport Config Type=string
Default=UDP=0.0.0.0:5
060:optional:name=sipL
scConduit;TCP=0.0.0.0:
5060:optional:name=sip
LscConduit
Specifies the transport, IP addresses,
and ports. Includes both the public
and private interfaces. If your system
consists of only public IPs, do NOT
duplicate the string. This field
indicates the public IPs for the UDP
and TCP portions only. Transports
can appear more than once. Use this
field only for a standalone system.
Enter the machine logical IP address
of the SIP Application Module. For
redundant configurations, leave this
field blank.
Retransmission
Off
Type=checkbox
Default=unchecked
This is a read-only field that controls
SIP retransmissions.