User's Manual

66 Chapter 5 Internet access
N0115791
Figure 16 Menu 4 – Internet Access Setup
Table 11 describes the fields in Figure 16.
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= ENET ENCAP
Multiplexing= LLC-based
VPI #= 8
VCI #= 35
My Login= N/A
My Password= N/A
ENET ENCAP Gateway= N/A
IP Address Assignment= Dynamic
IP Address= N/A
Network Address Translation= SUA Only
Address Mapping Set= N/A
Press ENTER to Confirm or ESC to Cancel:
Table 11 Menu 4 Internet access setup
Field Description Example
ISP’s Name Enter the name of your Internet Service Provider.
This information is for identification purposes only.
ChangeMe
Encapsulation Press [SPACE BAR] to select the method of
encapsulation used by your ISP. Choices are
PPPoE, PPPoA, RFC 1483, or ENET ENCAP.
ENET ENCAP
Multiplexing Press [SPACE BAR] to select the method of
multiplexing used by your ISP. Choices are
VC-based or LLC-based.
LLC-based
VPI # Enter the Virtual Path Identifier (VPI) that the
telephone company gives you.
8
VCI # Enter the Virtual Channel Identifier (VCI) that the
telephone company gives you.
35
My Login Configure the My Login and My Password fields for
PPPoA and PPPoE encapsulation only. Enter the
username exactly as your ISP assigned.
N/A
My Password Enter the password associated with the logon name
above.
N/A
ENET ENCAP
Gateway
Enter the gateway IP address supplied by your ISP
when you are using ENET ENCAP encapsulation.
N/A