User's Manual

58 Chapter 4 LAN setup
N0115791
Figure 12 Menu 3.1 – LAN Port Filter Setup
TCP/IP and DHCP ethernet setup menu
From the main menu, enter 3 to open Menu 3 - LAN Setup to configure TCP/IP
(RFC 1155) and DHCP Ethernet setup.
Figure 13 Menu 3 – LAN Setup
From menu 3, select the submenu option TCP/IP and DHCP Setup and press
[ENTER]. The screen now displays
Menu 3.2: TCP/IP and DHCP Ethernet
Setup
, as shown in Figure 14.
Menu 3.1 – LAN Port Filter Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel:
Menu 3 - LAN Setup
1. LAN Port Filter Setup
2. TCP/IP and DHCP Setup
Enter Menu Selection Number: