User's Manual

Chapter 2 Introducing the SMT 43
BCM50a Integrated Router Configuration — Advanced
Changing the system password
To change the BCM50a Integrated Router administrator password:.
1 From the main menu, enter 23 to display Menu 23 – System Security.
2 Enter 1 to display Menu 23.1 – System Security – Change Password.
Figure 5 Menu 23.1 – System Security – Change Password
3 Type your existing system password in the Old Password field, and press
[ENTER].
4 Type your new system password in the New Password field (up to 30
characters), and press [ENTER].
5 Retype your new system password in the Retype to confirm field for
confirmation and press [ENTER].
Note that as you type a password, the screen displays an asterisk * for each
character you type.
23 System Security Use this menu to change your password and enable
network user authentication.
24 System Maintenance From displaying system status to uploading firmware,
this menu provides comprehensive system
maintenance.
26 Schedule Setup Use this menu to schedule outgoing calls.
99 Exit Use this menu to exit (necessary for remote
configuration).
Menu 23.1 – System Security – Change Password
Old Password= ****
New Password= ?
Retype to confirm= ?
Enter here to CONFIRM or ESC to CANCEL:
Table 3 Main menu summary
No. Menu Title Function