User's Manual

42 Chapter 2 Introducing the SMT
N0115791
Figure 4 Main menu
Table 3 describes the fields in Figure 4.
BCM50a Integrated Router Main Menu
Getting Started Advanced Management
1. General Setup
2. WAN Setup
3. LAN Setup
4. Internet Access Setup
Advanced Applications
11. Remote Node Setup
12. Static Routing Setup
14. Dial-in User Setup
15. NAT Setup
21. Filter and Firewall Setup
22. SNMP Configuration
23. System Security
24. System Maintenance
26. Schedule Setup
99.Exit
Enter Menu Selection Number:
Table 3 Main menu summary
No. Menu Title Function
1 General Setup Use this menu to set up dynamic DNS and
administrative information.
2 WAN Setup Use this menu to configure the backup WAN
connection.
3 LAN Setup Use this menu to apply LAN filters, configure LAN
DHCP and TCP/IP settings.
4 Internet Access Setup Configure your Internet Access setup (Internet
address, gateway IP address, and logon) with this
menu.
11 Remote Node Setup Use this menu to configure detailed remote node
settings (your ISP is also a remote node) as well as
apply WAN filters.
12 Static Routing Setup Configure IP static routes in this menu.
14 Dial-in User Setup Use this menu to configure the Dial-in User
information.
15 NAT Setup Use this menu to configure Network Address
Translation.
21 Filter and Firewall Setup Configure filters, activate or deactivate the firewall,
and view the firewall log.
22 SNMP Configuration Use this menu to configure SNMP-related parameters.