User's Manual

40 Chapter 2 Introducing the SMT
N0115791
Type the username (“nnadmin “is the default) and press [ENTER].
The logon screen prompts you to enter the password.
Figure 3 SMT Login
Type the password (“PlsChgMe!” is the default) and press [ENTER]. As you type
the password, the screen displays an X for each character you type.
Note that if there is no activity for longer than five minutes after you log on, your
BCM50a Integrated Router will automatically log you off and display a blank
screen. If you see a blank screen, press [ENTER] to bring up the logon screen
again.
Navigating the SMT interface
The SMT is an interface that you use to configure your BCM50a Integrated
Router.
Table 2 lists several operations you must be familiar with before attempting to
modify the configuration.
Table 2 Main menu commands
Operations Keystrokes Descriptions
Move down to
another menu
[ENTER] To move forward to a submenu, type in the
number of the desired submenu and press
[ENTER].
Move up to a
previous menu
[ESC] Press the [ESC] key to move back to the
previous menu.
Move to a
“hidden” menu
Press [SPACE BAR]
to change No to Yes
then press [ENTER].
Fields beginning with “Edit” lead to hidden
menus and have a default setting of No. Press
[SPACE BAR] to change No to Yes, and then
press [ENTER] to go to a “hidden” menu.
Enter Username : XXXX
Enter Password : XXXX