User's Manual

39
BCM50a Integrated Router Configuration — Advanced
Chapter 2
Introducing the SMT
This chapter explains how to access the System Management Terminal and gives
an overview of its menus.
Introduction to the SMT
The BCM50a Integrated Router SMT (System Management Terminal) is a
menu-driven interface that you can access over a Telnet connection. This chapter
shows you how to navigate the SMT, and how to configure SMT menus.
Initial screen
When you turn on your BCM50a Integrated Router, it performs several internal
tests as well as line initialization.
After the tests, the BCM50a Integrated Router asks you to press
[ENTER] to
continue, as shown in Figure 2.
Figure 2 Initial screen
Logging on to the SMT
The logon screen appears after you press [ENTER], prompting you to enter the
username, as shown in Figure 3.
initialize ch =0, ethernet address: 00:A0:C5:22:1A:03
initialize ch =1, ethernet address: 00:A0:C5:22:1A:04
Press ENTER to continue...