User's Manual

Appendix G Command Interpreter 269
BCM50a Integrated Router Configuration — Advanced
Bandwidth management commands
Table 63 lists and describes the bandwidth management commands. Each of these
commands must be preceded by
bm. For example, type bm show lan to display
the LAN port’s bandwidth management settings.
Table 63 Bandwidth management commands
Command Description
interface lan enable <bandwidth
xxx>
Enables bandwidth
management (BWM) for traffic
going out the LAN interface.
You can also specify the b/s of
bandwidth.
<wrr|prr>
Sets the queueing mechanism
to fairness-based (WRR) or
priority-based (PRR).
<efficient>
Turns on the work-conserving
feature.
disable
Disables bandwidth
management for traffic going
out the LAN interface.
wan enable <bandwidth
xxx>
Enables bandwidth
management for traffic going
out the WAN interface. You
can also specify the b/s of
bandwidth.
<wrr|prr>
Sets the queueing mechanism
to fairness-based (WRR) or
priority-based (PRR).
<efficient>
Turns on the work-conserving
feature.
disable
Disables bandwidth
management for traffic going
out the WAN interface.
class lan add # bandwidth xxx <name xxx>
Adds a class with bandwidth
xxx b/s in LAN. The name is
for your information.
<priority
x>
Sets the class priority. The
range is between 0 (the
lowest) to 7 (the highest).