User's Manual

Appendix G Command Interpreter 249
BCM50a Integrated Router Configuration — Advanced
Exit Command
Ethernet Commands
Table 58 lists and describes the Ethernet commands. Each of these commands
must be preceded by
ether. For example, type ether config to display
information on the LAN configuration.
disp
Displays the current NetBIOS filter
modes.
config <0:Between LAN and
WAN/ 3: IPSec Pass through/
4: Trigger Dial> <on|off>
Sets NetBIOS filters.
ddns
debug <level>
Enables or disables DDNS service.
display <iface name>
Displays DDNS information.
restart
Restarts DDNS.
logout
This command has no effect.
cpu
display
Displays the CPU utilization.
Table 57 Exit Command
Command Description
exit
Ends the command interpreter session.
Table 58 Ether Commands
Command Description
config
Displays LAN configuration information.
driver
cnt
Table 56 Sys commands
Command Description