User's Manual

Appendix G Command Interpreter 247
BCM50a Integrated Router Configuration — Advanced
trcpacket
Uses trace packets to capture parts of
packets in order to see the packet flow
from one interface to another.
create <entry> <size>
Creates a packet trace buffer.
destroy
Removes the packet trace buffer.
channel <name> [none|incoming|
outgoing|bothway]
Sets the packet trace direction for a
given channel.
string [on|off]
Enables or disables the sending of a
log to the trace packet buffer when
configuration changes are made or
displays the current setting if neither
on/off is specified.
switch [on|off]
Enables or disables packet trace or
displays the current setting if neither on
nor off is specified.
disp
Displays the trace packets.
udp
Sends the trace packets to another
system using UDP.
udp switch [on|off]
Enables or disables the sending of the
trace packets to another system using
UDP or displays the current setting.
udp addr <addr>
Sets the target IP address for sending
trace packets using UDP.
udp port <port>
Sets the UDP port (should match that
of the target IP address) for sending
trace packets using UDP.
parse [[start_idx], end_idx]
Displays detailed packet details of the
packet range specified.
brief
Displays a brief listing of packet
contents.
version
Displays the RAS code and driver
versions.
view <filename>
Displays the specified text file.
wdog
switch [on|off]
Turns the watchdog firmware
protection feature on or off.
cnt [value]
Sets (0-34 463) or displays the current
watchdog count (in 1.6 sec units).
Table 56 Sys commands
Command Description