User's Manual

Appendix G Command Interpreter 245
BCM50a Integrated Router Configuration — Advanced
display
Displays the syslog settings.
facility [Local ID(1-7)]
Specifies the file to which the device
logs the syslog messages.
server [domainName/IP]
Specifies the IP address of the syslog
server the syslogs are sent.
consolidate
switch <0:on|1:off>
Turns log consolidation on or off.
period
Sets the consolidation period (in
seconds).
msglist
Displays the consolidated messages.
updateSvrIP <minute>
Sets how often to resolve the mail and
syslog server domain name to an IP
address.
switch
bmlog <0:no|1:yes>
Turns the broadcast or multicast log on
or off.
display
Displays switch settings.
trilog <0:no|1:yes>
Turns triangle route logging on or off.
reboot [0:cold boot/1: immediate
reboot/2: bootModule debug
mode]
Restarts the device.
stdio [minute]
Sets or displays the management
terminal idle timeout value.
tos
display
Shows all runtime Temporarily Open
Sessions.
debug
Turns TOS debug message on or off.
listPerHost
Displays all hosts session counts.
sessPerHost
Sets the session per host limit.
timeout
display
Displays all TOS (Temporarily Open
Session) timeout information.
icmp
Sets the ICMP session idle timeout
value.
Table 56 Sys commands
Command Description