User's Manual

Appendix G Command Interpreter 243
BCM50a Integrated Router Configuration — Advanced
logs
category
8021x
Records logs for IEEE 802.1X.
access [0:none/1:log/
2:alert/3:both]
Records, sends alerts, or both for
access control logs.
attack [0:none/1:log/
2:alert/3:both]
Records, sends alerts, or both for
firewall attack logs.
cdr [0:none/1:log]
Records Call Detail Record logs.
display
Displays the category settings.
error [0:none/1:log/
2:alert/3:both]
Records, sends alerts, or both for
system error logs.
icmp [0:none/1:log]
Records ICMP logs.
ike [0:none/1:log/2:alert/
3:both]
Records, sends alerts or both for
access control logs.
ipsec [0:none/1:log/
2:alert/3:both]
Records the access control logs
javablocked [0:none/1:log]
Records the java blocked logs.
mten [0:none/1:log]
Records the system maintenance logs.
packetfilter [0:none/
1:log]
Records the packet filter logs.
ppp [0:none/1:log]
Records the PPP logs.
remote [0:none/1:log]
Records the remote management logs.
tcpreset [0:none/1:log]
Records the TCP reset logs.
upnp [0:none/1:log]
Records the UPnP logs.
urlblocked [0:none/1:log/
2:alert/3:both]
Records and/or sends alerts for web
access blocked logs.
urlforward [0:none/1:log]
Records web access forward logs.
clear
Clears the log.
display [access|attack|error|ike|i
psec|javablocked|mten|pack
etfilter|pki|
tcpreset|tls|upnp|urlblock
ed|urlforward]
Displays all logs or specifies a category
of logs.
errlog
clear
Clears the error log.
Table 56 Sys commands
Command Description