User's Manual

241
BCM50a Integrated Router Configuration — Advanced
Appendix G
Command Interpreter
The following describes how to use the command interpreter. Enter 24 in the main
menu to bring up the system maintenance menu. Enter 8 to go to Menu 24.8 -
Command Interpreter Mode. See the included disk or www.nortel.com for
more detailed information on these commands.
Command Syntax
• The command keywords are in Courier New font.
• Enter the command keywords exactly as shown. Do not abbreviate.
• The required fields in a command are enclosed in angle brackets <>.
• The optional fields in a command are enclosed in square brackets [].
•The |symbol means or.
For example,
sys filter netbios config <type> <on|off>
means that you must specify the type of netbios filter and whether to turn it on
or off.
Command usage
A list of valid commands can be found by typing help or ? at the command
prompt. Always type the full command. Type
exit to return to the SMT main
menu when you are finished.
Note: Use of undocumented commands or misconfiguration can
damage the unit and possibly render it unusable.