User's Manual

192 Chapter 18 Call scheduling
N0115791
After you configure your schedule sets, you must apply them to the desired
remote nodes. Enter 11 from the Main Menu and then enter the target remote
node index. Using [SPACE BAR], select PPPoE or PPPoA in the
Encapsulation field and then press [ENTER] to make the schedule sets field
available, as shown in Figure 96.
Figure 96 Applying Schedule Sets to a Remote Node (PPPoE)
You can apply up to four schedule sets, separated by commas, for one remote
node. Change the schedule set numbers to your preferences.
Menu 11.1 - Remote Node Profile
Rem Node Name= ChangeMe Route= IP
Active= Yes Bridge= No
Encapsulation= PPPoA Edit IP/Bridge= No
Multiplexing= LLC-based Edit ATM Options= No
Service Name= N/A Edit Advance Options= N/A
Incoming: Telco Option:
Rem Login= Allocated Budget(min)= 0
Rem Password= ******** Period(hr)= 0
Outgoing: Schedule Sets=
My Login= Nailed-Up Connection= No
My Password= ******** Session Options:
Authen= CHAP/PAP Edit Filter Sets= No
Idle Timeout(sec)= 100
Press ENTER to Confirm or ESC to Cancel: