User's Manual

186 Chapter 17 Remote Management
N0115791
Figure 93 Menu 24.11 – Remote Management Control
Table 40 describes the fields in Figure 93.
Menu 24.11 - Remote Management Control
TELNET Server: Port = 23 Access = Disable
Secure Client IP = 0.0.0.0
FTP Server: Port = 21 Access = Disable
Secure Client IP = 0.0.0.0
SSH Server: Certificate = auto_generated_self_signed_cert
Port = 22 Access = Disable
Secure Client IP = 0.0.0.0
HTTPS Server: Certificate = auto_generated_self_signed_cert
Authenticate Client Certificates = No
Port = 443 Access = Disable
Secure Client IP = 0.0.0.0
HTTP Server: Port = 80 Access = LAN only
Secure Client IP = 0.0.0.0
SNMP Service: Port = 161 Access = Disable
Secure Client IP = 0.0.0.0
DNS Service: Port = 53 Access = LAN only
Secure Client IP = 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
Table 40 Menu 24.11 – Remote Management control
Field Description
Telnet Server
FTP Server SSH
Server
HTTPS Server
HTTP Server
SNMP Service
DNS Service
Each of these read-only labels denotes a service that you can use
to remotely manage the BCM50a Integrated Router.
Port This field shows the port number for the service or protocol. You
can change the port number if needed, but you must use the same
port number to access the BCM50a Integrated Router.
Access Select the access interface (if any) by pressing [SPACE BAR], then
[ENTER] to choose from: LAN only, WAN only, ALL or Disable.
Secure Client IP The default 0.0.0.0 allows any client to use this service to remotely
manage the BCM50a Integrated Router. Enter an IP address to
restrict access to a client with a matching IP address.