User's Manual

175
BCM50a Integrated Router Configuration — Advanced
Chapter 16
System Maintenance menus 8 to 10
This chapter leads you through SMT menus 24.8 to 24.10.
Command Interpreter mode
The Command Interpreter (CI) is a part of the main router firmware. The CI
provides much of the same functionality as the SMT, while adding some
low-level setup and diagnostic functions. Enter the CI from the SMT by selecting
menu 24.8. Access can be by Telnet connection, although some commands are
only available with a serial connection. See the included disk or www.nortel.com
for more detailed information about CI commands. Enter 8 from Menu 24 -
System Maintenance.
Note: Use of undocumented commands or misconfiguration can
damage the unit and possibly render it unusable.