User's Manual

138 Chapter 12 SNMP Configuration
N0115791
Figure 66 Menu 22 – SNMP Configuration
Table 27 describes the SNMP configuration parameters.
Menu 22 - SNMP Configuration
SNMP:
Get Community=
Set Community=
Trusted Host= 0.0.0.0
Trap:
Community=
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
Table 27 SNMP Configuration Menu Fields
Field Description Example
Get Community Type the Get community, which is the password for
the incoming Get- and GetNext requests from the
management station.
(this is blank
by default)
Set Community Type the Set community, which is the password for
incoming Set requests from the management
station.
(this is blank
by default)
Trusted Host If you enter a trusted host, your BCM50a Integrated
Router will only respond to SNMP messages from
this address. A blank (default) field means your
BCM50a Integrated Router will respond to all SNMP
messages it receives, regardless of source.
0.0.0.0
Trap
Community
Type the Trap community, which is the password
sent with each trap to the SNMP manager.
Public
Destination Type the IP address of the station to send your
SNMP traps to.
0.0.0.0
After you complete this menu, press [ENTER] at the
prompt “Press [ENTER] to confirm or [ESC] to
cancel” to save your configuration or press [ESC] to
cancel and go back to the previous screen.