User's Manual

130 Chapter 11 Filter configuration
N0115791
Example Filter
The example shown in Figure 60 is set to block outside users from accessing the
BCM50a Integrated Router via Telnet. See the included disk for more Filter Rules
example.
Value Enter the value (in Hexadecimal notation) to compare with
the data portion.
More If Yes, a matching packet is passed to the next filter rule
before an action is taken; or the packet is disposed of
according to the action fields.
If More is Yes, then Action Matched and Action Not Matched
are No.
Yes
No
Log Select the logging option from the following:
None - No packets are logged.
Action Matched - Only packets that match the rule
parameters are logged.
Action Not Matched - Only packets that do not match the
rule parameters are logged.
Both – All packets are logged.
None
Action
Matched
Action Not
Matched
Both
Action
Matched
Select the action for a packet matching the rule. Check Next
Rule
Forward
Drop
Action
Not
Matched
Select the action for a packet not matching the rule. Check Next
Rule
Forward
Drop
After you complete filling in Menu 21.1.1.1 - Generic Filter
Rule, press [ENTER] at the message “Press ENTER to
Confirm” to save your configuration, or press [ESC] to
cancel. This data is now be displayed on Menu 21.1.1 -
Filter Rules Summary.
Table 26 Generic Filter Rule Menu fields
Field Description Options