User's Manual
Chapter 1 Getting started 9
BCM 4.0 Installation Checklist and Quick Start Guide
Default values
Use Table 2 and Table 3 to view and record changes to default BCM system information.
15 min. Configure the required BCM
system parameters (Element
Manager or Startup Profile)
“Configuring the BCM system
parameters” on page 37
1 min./
MBM
Configure the MBMs with
Element Manager
“Configuring the MBMs” on
page 42
N/A (Optional) Complete the
configuration by customizing
other parameters
“Customizing other
parameters” on page 43
Note 1: The stated times can vary depending on the number and type of items installed.
Note 2: For more detailed information, refer to the BCM200/400 4.0 Installation and Maintenance Guide.
Table 2 Default IP addresses
Port IP address (subnet mask) New IP address
LAN 1 10.10.10.1
(255.255.255.0)
LAN 2 10.10.11.1
(255.255.255.0)
Table 3 Default user names and passwords
Tool User ID | User name Password New password
Element Manager nnadmin PlsChgMe!
BCM 4.0 web page
(http:// [IP address])
nnadmin PlsChgMe!
Telset Administration
(F9*8 and F**Config)
SETNNA
(738662)
CONFIG
(266344)
Telset Administration voice
mail
(Feature 983)
SETNNA
(738662)
CONFIG
(266344)
Telset Administration initialize
voice mail
(Feature 983)
–CONFIG
(266344)
Table 1 Installation and configuration checklist (Sheet 2 of 2)
;
Task Reference Comments