User's Manual

8 Chapter 1 Getting started
N0060602N0060602
The clock icon indicates that a procedure or task has been timed; the time is provided next
to the icon.
Installation and configuration summary
Table 1 provides the tasks to install and configure a BCM system.
Table 1 Installation and configuration checklist (Sheet 1 of 2)
;
Task Reference Comments
N/A Review the BCM system
hardware and configuration tools
“System overview” on page
13
N/A Verify that you have the tools,
materials, and data required
“Tools, data, and parameters”
on page 10
15 min. Complete the checklists before
installing the BCM system
“Checklists” on page 11
12 min. Mount the BCM main unit:
• Rack-mount
• Wall-mount
• Desk-mount
“Mounting a BCM main unit
and expansion unit” on page
17
12 min. (Optional)
Mount the BCM expansion unit:
• Rack-mount
• Wall-mount
• Desk-mount
“Mounting a BCM main unit
and expansion unit” on page
17
1 min. (Optional) Connect the BCM
expansion unit to the BCM main
unit
“Connecting the expansion
unit to the main unit” on page
21
4 min. Install MBMs in the BCM main
unit and expansion unit
“Installing the MBMs” on page
21
15 min. Connect MBM wiring “Connecting the MBM wiring”
on page 24
6 min. Apply power to the BCM system “Connecting the MBM wiring”
on page 24
7 min. (Optional) Connect the WAN
card and modem to the BCM
system
“Connecting the data
networking hardware” on
page 30
9 min./
set
Install telephony hardware “Unpacking, placing, and
wiring telephone hardware”
on page 31
9 min. Connect to the BCM system
(LAN or Ethernet crossover
cable)
“Connecting to the BCM
system” on page 33
15 min. Download and install Element
Manager
“Downloading from the BCM
web page” on page 36
5 min. Enter keycode “Generating a software
keycode” on page 37